Hypalon Inflatable Boat Fabric, 800 denier available in dark gray. 800D polyester core with Neoprene backing for superior air retention. Available in Square Foot (12″ x 12″). Made in Japan. If you order multiple square feet, we will cut one continuous piece up to 4 square feet. Works on any Hypalon or CSM inflatable boat. Adhesives listed in related products below.
Generic Hypalon Fabric, 800 Denier, per Square Foot, Made By Achilles
$27.95
Inflatable Boat Hypalon Fabric, 800 denier. This particular fabric is only available in dark gray.
| Manufacturer |
|---|
You may also like…
Close
Generic Hypalon Fabric, 420 Denier, Per Meter, Dark Gray. Made By Achilles
Inflatable Boat Hypalon Fabric, 420 denier. This particular fabric is only available in dark gray.
Close
Shore Adhesive, Single-Part Glue for Hypalon or CSM Inflatable Boats, 1/2 Pint (8 oz.)
Shore Adhesive is a powerful, easy to use, single-part contact cement, and when used correctly, will attach patches and accessories to all Hypalon, fiberglass, Kevlar, and aluminum boats. 1/2 Pint (8 oz)
This item cannot be shipped via Priority Mail or UPS Air
Close
Bixler’s Orange Off Inflatable Boat Cleaner, 32 oz, Removes Adhesive, Mold, Mildew, Bottom Paint and Barnacles
Bixler's Orange Off Inflatable Boat Cleaner, Removes Adhesives, Mold, Mildew, Oxidation, Bottom Paint and Barnacles. Comes with non-abrasive scrubbing pad. 1 Quart (32 fl. oz.)
Close
Inflatable Boat Adhesive, Hypalon Boats, Weaver 2 Part 1/4 Liter, 8 oz.
Weaver Hypalon 2-part adhesive, 8 ounce, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Related products
Close
Inflatable Boat Transom Towing Ring and Double Lifting Eye Bolt & Nut, Stainless Steel, Each
Stainless Steel Transom Towing and Lifting Double Eye Bolt & Nut for Inflatable Boats, sold as each.
Close
AB and Caribe Inflatable Boat Air Valve Cap, Push-Push Style.
AB and Caribe Inflatables Push-Push Air Valve Cap.
Close
MEK “PVC” Cleaning Solvent, 1/4 pint – 4 ounces
Methyl Ethyl Ketone (MEK) Cleaning Solvent, 1/4 pint (4 oz). To remove old glues from PVC inflatable boats and to prep the surface when installing patches.
This item cannot be shipped via Priority Mail, UPS Air
Close
Weaver C1207 Universal Swivel Dinghy Chocks, 6″ High. Accommodates up to 1000 lbs
The Weaver Universal Swivel Dinghy Chocks are made from rugged 100 marine grade stainless steel with 3.5" by 7" Hypalon rubber molded pads.
Close
Achilles Valve Strap with Valve Casing Ring Gasket, Gray (Achilles Part #C343N) , Single Valve Strap
Achilles replacement strap for PH valves, newer version, Gray (Achilles Part #C343N).
ToobSeal Inflatable Boat Interior Sealant – Quart
Bixler's ToobSeal ® Interior Sealer, quart, stops slow seam leaks and porosity in both Hypalon and PVC inflatable boats using an extraordinary acrylic based formula.
Close
Achilles Inflatable Boat Plastic Side Stringer (Achilles Part #C391GY) for Wood Inflatable Boat Floors
Achilles gray plastic side battenss for any Achilles floorboard that uses plastic side stringers, such as LEX, LS, and SPD models. Measures 35-1/2" long. (Achilles Part #C391GY).
Close
Weaver Universal C1007 Dinghy Chocks. Non Swiveling. Accommodates up to 1000 lbs.
The Weaver Universal Dinghy Chocks with 3.5" x 7" pads are made from rugged marine grade stainless steel with EPDM rubber molded pads.
Reviews
There are no reviews yet.