Weaver transom mount kit. Snap davits for soft or hard bottomed inflatable dinghies for yachts without a swim platform with gray pads. Mounts to your transom for quick, easy removal and storage. Mounting kit comes complete with two glue-on pads for the dinghy and two mounting fittings for the transom. Accessories sold separately, include stand-offs in various sizes, stand-off pads and adhesives.
Weaver Davit Transom Mount Kit – gray RBD150GY. For Sailboats or Yachts without Swim Platforms.
$487.95
Weaver transom mount kit (Part #RBD150GY). Snap davits for soft or hard bottomed inflatable dinghies for yachts without a swim platform with gray pads. Mounts to your transom for quick, easy removal and storage.
| Manufacturer |
|---|
You may also like…
Close
Inflatable Boat Adhesive for PVC and Urethane Inflatables, Weaver 2 Part, 1/4 Liter, 8 oz
Weaver PVC 2-part inflatable boat adhesive, 8 ounce, for gluing on rubber pads, lifting D rings and making repairs to Zodiacs and other inflatables made from PVC and Urethane material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Weaver Snap Davit Kit for Inflatable Boats, Swim Platform Kit, Gray RBD100 GY. 150 lbs Maximum Weight
Weaver dinghy Davits, swim platform kit (PART #RBD100). Snap davits for soft or hard bottom inflatable dinghies. Intalls on swim platform. Light gray pads.
Close
Inflatable Boat Adhesive, Hypalon Boats, Weaver 2 Part 1/4 Liter, 8 oz.
Weaver Hypalon 2-part adhesive, 8 ounce, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Related products
Close
Weaver Leaver Model 3, Keep Outboard Motor on Transom While Boat in Upright position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Model 3 is for deep (low) transoms measuring 4" - 6" from the top of the transom to the top of the tube.
Close
Weaver Universal C1000 Dinghy Chocks. Non Swiveling. Accommodates up to 500 lbs.
The Weaver Universal Dinghy Chocks with 3.5" x 3.5" pads are made from rugged marine grade stainless steel with hypalon rubber molded pads.
Close
Weaver Stand Off Brackets – 12″
Weaver stand-off brackets available in 12", 18", 24", 30", 36", 42", 48", 54" and 60" long. Stand-off Brackets hold the dinghy in the up-right position while on the swim platform. Sold as a pair with quick release clips on both ends.
Close
Weaver Snap Davit Heads (Pair) Part #RS110, Standard Size
Weaver davit heads (PART #RS110) are the spring loaded part of the Weaver RBD100 kit that mounts to the swim platform that the yolk snaps into. Sold as a pair of davit heads.
Close
Weaver Transom Mount Davit Heads (Pair) Part #RS150 for Vertical Transom
Transom mount davit heads are the spring loaded part of the RBD150 that mounts to the transom of the yacht that the RSH120 snaps into. Sold as a pair of davit heads.
Close
Weaver Snap Davit Stainless Steel Yoke (Pair) Part # RSH120
Weaver stainless steel yoke (PART#RSH120) for RP101. This is the part that actually snaps into the Davit Heads. Sold as a pair.
Close
Weaver C1208 Universal Swivel Dinghy Chocks. Accommodates up to 1000 lbs.
The Weaver Universal Swivel Dinghy Chocks are made from rugged 100 marine grade stainless steel with 3.5" by 8" EPDM rubber molded pads.
Close
Weaver Leaver Standard Model, Keep Outboard Motor on Transom While Boat is in Upright Position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Standard model is for shallow transoms measuring 0" - 4" from the top of transom to the top of the tube.
Reviews
There are no reviews yet.