Weaver adjustable 42″ – 48″ Stand-off Brackets allow the dinghy to be held in the up right position while on the swim platform. Also available in Adjustable Sizes 12″-18″, 18″-24″, 24″-30″, 30″-36″, 36″-42″, 42″-48″, 48″-54″ and 54″-60″. Stand-offs are sold as a Pair. They come with four L-Clips for storage and attaching to the dinghy as well as quick release clips on both ends.
Weaver Adjustable Stand Off Brackets – 42″-48″
$239.95
Weaver adjustable stand-off brackets 42″-48″. Also available in Adjustable Sizes 12″-18″, 18″-24″, 24″-30″, 30″-36″, 36″-42″, 42″-48″, 48″-54″ and 54″-60″. Sold as a pair with quick release clips on both ends.
| Manufacturer |
|---|
In stock
You may also like…
Close
Weaver Adjustable Stand Off Brackets – 24″-30″
Weaver adjustable stand-off brackets 24"-30". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 30″-36″
Weaver adjustable stand-off brackets 30"-36". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 48″-54″
Weaver adjustable stand-off brackets 48"-54". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 54″- 60″
Weaver adjustable stand-off brackets 54"-60". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 18″-24″
Weaver adjustable stand-off brackets 18"-24". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 36″-42″
Weaver adjustable stand-off brackets 36"-42". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 12″-18″
Weaver adjustable stand-off brackets 12"-18". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Related products
Close
Weaver Rubber Pads for Inflatable Boats, Pair
Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150, gray. Sold in Pairs.
Close
Weaver Offset Davit Heads
Offset Davit Heads are for Swim Platforms that are high off the water.
Close
Weaver Rubber Pads for Inflatable Boats, Single Pad
Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150, gray. Sold as a single pad.
Close
Weaver Snap Davit Stainless Steel Yoke (Pair) Part # RSH120
Weaver stainless steel yoke (PART#RSH120) for RP101. This is the part that actually snaps into the Davit Heads. Sold as a pair.
Close
Inflatable Boat Adhesive for Hypalon Boats, Weaver 2-Part 1 Liter (33.8 US fluid ounces)
Weaver Hypalon 2-part adhesive, 1 Liter, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Weaver Leaver Model 3, Keep Outboard Motor on Transom While Boat in Upright position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Model 3 is for deep (low) transoms measuring 4" - 6" from the top of the transom to the top of the tube.
Close
Weaver C1208 Universal Swivel Dinghy Chocks. Accommodates up to 1000 lbs.
The Weaver Universal Swivel Dinghy Chocks are made from rugged 100 marine grade stainless steel with 3.5" by 8" EPDM rubber molded pads.
Close
Registration Sticker Holders for Inflatable Boats, Pair
Registration sticker holders glue down to your inflatable boat and come in 3" x 3" or 3" x 4" size.
Reviews
There are no reviews yet.