Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150,gray. Sold as a single pad.
Click on the link below to access Weaver Rubber Pad instructions.
Weaver Rubber Pads for Inflatable Boats, Single Pad
$85.95
Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150, gray. Sold as a single pad.
| Manufacturer |
|---|
You may also like…
Close
Weaver Davit Transom Mount Kit – gray RBD150GY. For Sailboats or Yachts without Swim Platforms.
Weaver transom mount kit (Part #RBD150GY). Snap davits for soft or hard bottomed inflatable dinghies for yachts without a swim platform with gray pads. Mounts to your transom for quick, easy removal and storage.
Close
Weaver Snap Davit Stainless Steel Yoke (Pair) Part # RSH120
Weaver stainless steel yoke (PART#RSH120) for RP101. This is the part that actually snaps into the Davit Heads. Sold as a pair.
Close
Inflatable Boat Adhesive, Hypalon Boats, Weaver 2 Part 1/4 Liter, 8 oz.
Weaver Hypalon 2-part adhesive, 8 ounce, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Weaver Snap Davit Kit for Inflatable Boats, Swim Platform Kit, Gray RBD100 GY. 150 lbs Maximum Weight
Weaver dinghy Davits, swim platform kit (PART #RBD100). Snap davits for soft or hard bottom inflatable dinghies. Intalls on swim platform. Light gray pads.
Close
Weaver Rubber Pads for Inflatable Boats, Pair
Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150, gray. Sold in Pairs.
Close
Inflatable Boat Adhesive for PVC and Urethane Inflatables, Weaver 2 Part, 1/4 Liter, 8 oz
Weaver PVC 2-part inflatable boat adhesive, 8 ounce, for gluing on rubber pads, lifting D rings and making repairs to Zodiacs and other inflatables made from PVC and Urethane material.
This item cannot be shipped via Priority Mail or UPS Air
Related products
Close
Weaver MotoSto Swim Platform Mount
The Weaver Swim Platform MotoSto allows you to remove the motor from your dinghy and place it on the swim platform in a horizontal position before getting out of the dinghy.
Close
Walker Bay Davits for the WB8
Walker Bay Davits for the Walker Bay 8.
Close
Weaver Winch with Quick Removable Bracket
This stainless steel winch mounts to your cockpit overhead, or other suitable location, and raises your dinghy, tilting it up onto the swim platform. It features a custom braking system that allows the dinghy to be safely lowered to the water.
Close
Weaver Leaver Standard Model, Keep Outboard Motor on Transom While Boat is in Upright Position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Standard model is for shallow transoms measuring 0" - 4" from the top of transom to the top of the tube.
Close
Weaver C1207 Universal Swivel Dinghy Chocks, 6″ High. Accommodates up to 1000 lbs
The Weaver Universal Swivel Dinghy Chocks are made from rugged 100 marine grade stainless steel with 3.5" by 7" Hypalon rubber molded pads.
Close
Weaver Offset Davit Heads
Offset Davit Heads are for Swim Platforms that are high off the water.
Close
Registration Sticker Holders for Inflatable Boats, Pair
Registration sticker holders glue down to your inflatable boat and come in 3" x 3" or 3" x 4" size.
Close
Weaver Stand Off Brackets – 24″
Weaver stand-off brackets available in 12", 18", 24", 30", 36", 42", 48", 54" and 60" long. Stand-off Brackets hold the dinghy in the up-right position while on the swim platform. Sold as a pair with quick release clips on both ends.
Reviews
There are no reviews yet.