Close
Weaver Snap Davit Extended Heads (Pair) Part #Extended Heads. Extended 1″ – 4″
Weaver davit heads (PART #Extended Heads) are the spring loaded part of the RBD100 that mounts to the swim platform that the RSH120 snaps into. Sold as a pair.
Close
Weaver MotoSto Swim Platform Mount
The Weaver Swim Platform MotoSto allows you to remove the motor from your dinghy and place it on the swim platform in a horizontal position before getting out of the dinghy.
Close
Weaver Offset Davit Heads
Offset Davit Heads are for Swim Platforms that are high off the water.
Close
Weaver CREM Removable Chock Bases for All Weaver Brand Chocks
Weaver Removable bases that let you remove the Weaver chock stanchions from your deck or bridge. Must be ordered at the time you order your chocks as the chocks require minor modications.
Close
Weaver MotoSto Transom Mount
The Weaver Transom MotoSto allows you to store your 15 hp or smaller motor on the transom of your yacht.
Close
Weaver Snap Davit Kit for Inflatable Boats, Swim Platform Kit, Gray RBD100 GY. 150 lbs Maximum Weight
Weaver dinghy Davits, swim platform kit (PART #RBD100). Snap davits for soft or hard bottom inflatable dinghies. Intalls on swim platform. Light gray pads.
Close
Weaver Davit Transom Mount Kit – gray RBD150GY. For Sailboats or Yachts without Swim Platforms.
Weaver transom mount kit (Part #RBD150GY). Snap davits for soft or hard bottomed inflatable dinghies for yachts without a swim platform with gray pads. Mounts to your transom for quick, easy removal and storage.
Close
Weaver Snap-Ups Davits
They have a 12" drop for hooking up a dinghy from a high swim platform and lifting it out of the water to a 3" drop below the swim platform so the dinghy doesn't fill up with water.
Close
Weaver Front Arc Only
Weaver front Arc only, this unit mounts on the floor of the dinghy and connects to existing davit heads mounted on the swim platform.
Please fill out the worksheet located in the link below. Upon completion return it us via email: [email protected] or via Fax at 973-506-7087.
Front Arc WorkSheet
Close
Weaver Universal C1000 Dinghy Chocks. Non Swiveling. Accommodates up to 500 lbs.
The Weaver Universal Dinghy Chocks with 3.5" x 3.5" pads are made from rugged marine grade stainless steel with hypalon rubber molded pads.
-10%
Close
Walker Bay Davits for the WB8 READY TO SHIP
Walker Bay Davits for the Walker Bay 8.
Close
Weaver RBD100ARC Swim Platform Kit with Transom Arc. For Heavier Weights in the Stern. 250 lb. Maximum Weight.
Weaver RBD100ARC Snap Davit Swim Platform Kit with Arc for Heavier Stern Weight Applications. Maximum Weight Capacity is 250 lbs (Boat and Motor).
Close
Walker Bay Davits for the WB8
Walker Bay Davits for the Walker Bay 8.
Close
Walker Bay Davits for the WB10
Walker Bay Davits for the Walker Bay 10.
Close
Weaver Leaver Standard Model, Keep Outboard Motor on Transom While Boat is in Upright Position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Standard model is for shallow transoms measuring 0" - 4" from the top of transom to the top of the tube.
Close
Weaver Leaver Model 3, Keep Outboard Motor on Transom While Boat in Upright position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Model 3 is for deep (low) transoms measuring 4" - 6" from the top of the transom to the top of the tube.
Close
Weaver C1204 Universal Swivel Dinghy Chocks. Accommodates up to 500 lbs.
The Weaver Universal C1204 Swivel Dinghy Chocks with 3.5" by 3.5" pads are made from rugged marine grade stainless steel with hypalon rubber molded pads.
Close
Weaver Universal C1007 Dinghy Chocks. Non Swiveling. Accommodates up to 1000 lbs.
The Weaver Universal Dinghy Chocks with 3.5" x 7" pads are made from rugged marine grade stainless steel with EPDM rubber molded pads.
Close
Weaver C1207 Universal Swivel Dinghy Chocks, 6″ High. Accommodates up to 1000 lbs
The Weaver Universal Swivel Dinghy Chocks are made from rugged 100 marine grade stainless steel with 3.5" by 7" Hypalon rubber molded pads.
Close
Weaver C1208 Universal Swivel Dinghy Chocks. Accommodates up to 1000 lbs.
The Weaver Universal Swivel Dinghy Chocks are made from rugged 100 marine grade stainless steel with 3.5" by 8" EPDM rubber molded pads.