Weaver adjustable 48″ – 54″ Stand-off Brackets allow the dinghy to be held in the up right position while on the swim platform. Also available in Adjustable Sizes 12″-18″, 18″-24″, 24″-30″, 30″-36″, 36″-42″, 42″-48″, 48″-54″ and 54″-60″. Stand-offs are sold as a Pair. They come with four L-Clips for storage and attaching to the dinghy as well as quick release clips on both ends.
Weaver Adjustable Stand Off Brackets – 48″-54″
$262.95
Weaver adjustable stand-off brackets 48″-54″. Also available in Adjustable Sizes 12″-18″, 18″-24″, 24″-30″, 30″-36″, 36″-42″, 42″-48″, 48″-54″ and 54″-60″. Sold as a pair with quick release clips on both ends.
| Manufacturer |
|---|
In stock
You may also like…
Close
Weaver Adjustable Stand Off Brackets – 30″-36″
Weaver adjustable stand-off brackets 30"-36". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 54″- 60″
Weaver adjustable stand-off brackets 54"-60". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 36″-42″
Weaver adjustable stand-off brackets 36"-42". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 24″-30″
Weaver adjustable stand-off brackets 24"-30". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 42″-48″
Weaver adjustable stand-off brackets 42"-48". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 12″-18″
Weaver adjustable stand-off brackets 12"-18". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 18″-24″
Weaver adjustable stand-off brackets 18"-24". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Related products
Close
Weaver Offset Davit Heads
Offset Davit Heads are for Swim Platforms that are high off the water.
Close
Weaver Rubber Pads for Inflatable Boats, Single Pad
Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150, gray. Sold as a single pad.
Close
Weaver Davit Stand-Off Pad – Gray (Weaver Part # RP301). Non-Swiveling.
Weaver RP301 rubber pad for stand-off brackets. Rubber pad 4 inches in diameter for attaching the stand-off bracket to the inflatable dinghy in gray. Sold individually.
Close
Weaver Universal C1000 Dinghy Chocks. Non Swiveling. Accommodates up to 500 lbs.
The Weaver Universal Dinghy Chocks with 3.5" x 3.5" pads are made from rugged marine grade stainless steel with hypalon rubber molded pads.
Close
Weaver Quick Kit for Easy Davit Head Removal from Your Swimstep, Part #QUICKKIT
Weaver plates for easy removal of davit heads (PART #WEAQUICKKIT). Receiver plates for easy removal of the Davit Heads from the Swim Platform for use with the RBD100 and SSHR for the SD1.
Close
Weaver Transom Arc
A rod that goes from the dinghy transom up over the top of the tube to the davit head on the swim platform for inflatables with 16-18 inch tubes.
Close
Weaver Leaver Model 3, Keep Outboard Motor on Transom While Boat in Upright position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Model 3 is for deep (low) transoms measuring 4" - 6" from the top of the transom to the top of the tube.
Close
Weaver Leaver Standard Model, Keep Outboard Motor on Transom While Boat is in Upright Position on Weaver Davits
A motor bracket for leaving your motor on your dinghy when stored on Weaver Davits. Standard model is for shallow transoms measuring 0" - 4" from the top of transom to the top of the tube.
Reviews
There are no reviews yet.