Weaver Davit Stand-Off Pad – Gray (Weaver Part # RP301). Non-Swiveling.
Weaver RP301 rubber pad for stand-off brackets. Rubber pad 4 inches in diameter for attaching the stand-off bracket to the inflatable dinghy in gray. Sold individually.
Weaver Stand Off Pads for Inflatables, Swivel (Weaver Part #RP304)
Weaver Stand off Pads for Inflatables, Gray, Swivel
Zodiac Inflatable Boat High Pressure Gauge 14 PSI. Works on most Bombard and Zooms.
Pressure gauge for inflatable dinghies using Bravo 2005 valves such as Zodiac Zoom, Bombard and TUG Inflatables.
Inflatable Boat Adhesive for PVC and Urethane Inflatables, Weaver 2 Part, 1 Liter (33.8 US fluid ounces)
Weaver PVC 2-part inflatable boat adhesive, 1 Liter, for gluing on rubber pads, lifting D rings and making repairs to Zodiacs and other inflatables made from PVC and Urethane material.
This item cannot be shipped via Priority Mail or UPS Air
Inflatable Boat Adhesive for Hypalon Boats, Weaver 2-Part 1 Liter (33.8 US fluid ounces)
Weaver Hypalon 2-part adhesive, 1 Liter, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Sold out
Close
Achilles Inflatable Wood Seat, Part # ACHWST112LG
Achilles painted wood seat with foam & channel attachment. 35 &1/4 inch
Sold out
Close
AB Inflatable Boat Removable Aluminum Rowing Seat
AB Inflatable Boat Removable Aluminum Rowing Seat. Fits the AB 8/9/10 VL-VS, AB 9.5/10 AL and AB 10UL.
Inflatable Boat Hook and Loop Oar Holder Hypalon or PVC- Light Gray
Glue down inflatable boat hook and loop oar holder, 4.5" in diameter, available in Hypalon or PVC
Walker Bay Inflatable Boat Deluxe Seat Genesis #25005
Walker Bay Genesis Inflatable Boat Deluxe Center Seat. (Part #25005)
Walker Bay Genesis Bow Locker/Seat (Part #3001030198)
Walker Bay Genesis Bow Locker/Seat
Bravo Hose Fitting for Bravo 1, 2 and 10 Foot Pumps
Hose Fitting/Connector for Bravo 1, 2 and 10 Foot Pumps
Walker Bay 8 & 10 Bow Cushion
Walker Bay Bow Locker Cushion for Plastic Rowing Dinghies 8' and 10'
Weaver Snap Davit Stainless Steel Yoke (Pair) Part # RSH120
Weaver stainless steel yoke (PART#RSH120) for RP101. This is the part that actually snaps into the Davit Heads. Sold as a pair.
Weaver Quick Kit for Easy Davit Head Removal from Your Swimstep, Part #QUICKKIT
Weaver plates for easy removal of davit heads (PART #WEAQUICKKIT). Receiver plates for easy removal of the Davit Heads from the Swim Platform for use with the RBD100 and SSHR for the SD1.
Weaver Transom Arc
A rod that goes from the dinghy transom up over the top of the tube to the davit head on the swim platform for inflatables with 16-18 inch tubes.
Weaver Snap Davit Heads (Pair) Part #RS110, Standard Size
Weaver davit heads (PART #RS110) are the spring loaded part of the Weaver RBD100 kit that mounts to the swim platform that the yolk snaps into. Sold as a pair of davit heads.
-18%
Close
Weaver Raised Davit Heads up to Four Inches
Raised davit heads are used for Swim Platforms where the platform is too low for a normal hookup of the RSH120.
Weaver Snap Davit Extended Heads (Pair) Part #Extended Heads. Extended 1″ – 4″
Weaver davit heads (PART #Extended Heads) are the spring loaded part of the RBD100 that mounts to the swim platform that the RSH120 snaps into. Sold as a pair.
Weaver Davit Heads that are Raised and Extended Out
UpSet Davit Heads are for Swim Platforms that are high off the water. They are custom made with a maximum
Weaver Transom Mount Davit Heads (Pair) Part #RS150 for Vertical Transom
Transom mount davit heads are the spring loaded part of the RBD150 that mounts to the transom of the yacht that the RSH120 snaps into. Sold as a pair of davit heads.
Weaver Snap-Ups Davits
They have a 12" drop for hooking up a dinghy from a high swim platform and lifting it out of the water to a 3" drop below the swim platform so the dinghy doesn't fill up with water.
Sold out
Close
Mercury Oar Holder, Gray
Mercury Oar Holder, Gray
Weaver Front Arc Only
Weaver front Arc only, this unit mounts on the floor of the dinghy and connects to existing davit heads mounted on the swim platform.
Please fill out the worksheet located in the link below. Upon completion return it us via email: [email protected] or via Fax at 973-506-7087.
Front Arc WorkSheet
Wheel-a-Weigh Extra Duty Dinghy Transom Wheels – Flip-up. 330 lb. Max Capacity
Get your inflatable boat to and from the water quickly, safely, and easily! Wheel-a-Weigh Standard launching wheels are for loads up to 330 lbs. (150 kg). Wheels are pneumatic.