Close
Caribe Boat Cover C9, 9X, and C27 Models – Fits Over Motor
This is a custom boat cover designed specifically for the Caribe Inflatable C19, 9X, and C27 Models. This cover will fit over 2 and 4 stroke outboard motors. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE 30-60 DAYS TO BE MADE AND SHIPPED.
Close
Novurania Inflatable Boat Cover. 360DL Model, No Bow Rails, with Handrails Only. – Sur Last Fabric
This is a custom boat cover designed exclusively for any Novurania 360DL Model with No Bow Rails, Handrails Only. Cover will fit over 2 and 4 stroke outboard motors. Our covers also feature an elastic shock cord to ensure a taught fit. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE 30-60 DAYS TO MAKE.
Inflatable Boat Bimini Top with Storage Boot (Ready to Ship)
ALL ITEMS LISTED BELOW ARE IN STOCK AND WILL SHIP WITHIN 24 HOURS OF THE NEXT BUSINESS DAY.
Bimini kit in Sunbrella or Marinex fabric with matching storage boot for inflatable boats and RIBs. See Related products below for the inflatable boat mounting pads and the attaching hardware.
-15%
Close
Caribe DL11 Boat Cover Sunbrella Jet Black
Caribe DL11 Boat Cover will fit over 2 and 4 stroke outboard motors. Our Sunbrella® boat cover is woven, which
Close
Weaver CREM Removable Chock Bases for All Weaver Brand Chocks
Weaver Removable bases that let you remove the Weaver chock stanchions from your deck or bridge. Must be ordered at the time you order your chocks as the chocks require minor modications.
Sold out
Close
Metrovac Magic Air Commercial Electric Inflatable Boat Inflator/Deflator 4 HP 110 Volt
Metrovac Magic Air Commercial 4 HP 110 Volt Electric Inflatable Boat Inflator/Deflator - Model Four. This is the most powerful unit we sell.
Close
Weaver Davit Heads that are Raised and Extended Out
UpSet Davit Heads are for Swim Platforms that are high off the water. They are custom made with a maximum
Close
Weaver Offset Davit Heads
Offset Davit Heads are for Swim Platforms that are high off the water.
Close
Novurania Inflatable Boat Cover 335DL Model. No Bow or Console Handrails – Sur Last Fabric
This is a custom boat cover designed exclusively for any Novurania 335 DL model with out bow or hand rails. Cover will fit over 2 and 4 stroke outboard motors. Our covers also feature an elastic shock cord to ensure a taught fit.
WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE 30-60 DAYS TO MAKE.
Close
Novurania Inflatable Boat Cover. 335DL Model, Bow Rails, and Handrails – Sur Last Fabric
This is a custom boat cover designed exclusively for any Novurania 335DL Model with Bow Rails, and Handrails. Cover will fit over 2 and 4 stroke outboard motors. Our covers also feature an elastic shock cord to ensure a taught fit. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE 30-60 DAYS TO MAKE.
Close
Weaver MotoSto Swim Platform Mount
The Weaver Swim Platform MotoSto allows you to remove the motor from your dinghy and place it on the swim platform in a horizontal position before getting out of the dinghy.
Close
TUG Inflatable Boat Cover for TUG 13, fits over Motor Sunbrella
TUG Inflatable Boat Cover for the TUG 13, Sunbrella. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE UP TO 45 DAYS TO MAKE.
Close
TUG Inflatable Boat Cover for TUG 11, fits over Motor Sunbrella
TUG Inflatable Boat Cover for the TUG 11, Sunbrella. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE UP TO 45 DAYS TO MAKE.
Close
TUG Inflatable Boat Cover for TUG 9, fits over Motor Sunbrella
TUG Inflatable Boat Cover for the TUG 9, Sunbrella. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE UP TO 45 DAYS TO MAKE.
Close
TUG Inflatable Boat Cover for TUG 8, fits over Motor Sunbrella
TUG Inflatable Boat Cover for the TUG 8, Sunbrella. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE UP TO 45 DAYS TO MAKE.
Close
TUG Inflatable Boat Cover for TUG 10, fits over Motor Sunbrella
TUG Inflatable Boat Cover for the TUG 10, Sunbrella. WHILE OUR MANUFACTURER IS WORKING DILIGENTLY TO KEEP LEAD TIMES SHORTER, SOME COVERS MAY TAKE UP TO 45 DAYS TO MAKE.
Close
Weaver Snap Davit Extended Heads (Pair) Part #Extended Heads. Extended 1″ – 4″
Weaver davit heads (PART #Extended Heads) are the spring loaded part of the RBD100 that mounts to the swim platform that the RSH120 snaps into. Sold as a pair.
Close
Weaver Dinghy Transom Wheels, Inflatable Boat Flip-Up Transom Wheels. 600 lb. Capacity
Weaver flip-up Dinghy Transom Launch wheels are made from stainless steel and roto-molded wheels that can hold up to a 600 pound inflatable or hard shell dinghy. The wheels are designed to go over rocks and sand with ease.
Sold out
Close
Metrovac Magic Air Commercial Electric Inflatable Boat Inflator/Deflator 1.7 HP 110 Volt.
Metrovac Magic Air Commercial 1.7 HP Electric 110 Volt Inflatable Boat Inflator/Deflator - Model Two. Provides high volume air power for rapid inflation or deflation of large inflatables.
-15%
Close
Caribe DL12 Inflatable Boat Cover Surlast Gray
This is a custom boat cover designed specifically for the Caribe Inflatable DL12 Models. This cover will not cover the motor.
Close
Walker Bay Inflatable Boat Deluxe Seat Genesis #25005
Walker Bay Genesis Inflatable Boat Deluxe Center Seat. (Part #25005)
Close
Walker Bay 10′ Daggerboard, Part #24058
Walker Bay 10 Dinghy Aluminum Centerboard, Fully Assembled
Close
Weaver Winch with Quick Removable Bracket
This stainless steel winch mounts to your cockpit overhead, or other suitable location, and raises your dinghy, tilting it up onto the swim platform. It features a custom braking system that allows the dinghy to be safely lowered to the water.
Close
Weaver Transom Arc
A rod that goes from the dinghy transom up over the top of the tube to the davit head on the swim platform for inflatables with 16-18 inch tubes.
Close
Walker Bay Genesis Bow Locker/Seat (Part #3001030198)
Walker Bay Genesis Bow Locker/Seat
Walker Bay 10′ Boat Rudder with Aluminum Blade, Part #24045
Walker Bay Boat 10' Rudder Assembled with Aluminum Blade. Part #24045
Close
Taylor Made Inflatable Boat Cover 17, Boats 17’5″ to 18’4″, up to 80″ Beam; Hot Shot Acrylic Fabric.
Inflatable Boat Cover, Blunt Bow, by Taylor Made. This Hot Shot™ Acrylic Fabric is a light-weight alternative that provides better water, mildew, and UV resistance than its poly-cotton counterparts.
Close
Metrovac Magic Air Commercial Electric Inflatable Boat Inflator/Deflator 1.17 HP 110 Volt
Metrovac Magic Air METDIDA1 Commercial 1.17 HP 110 Volt Inflatable Boat Electric Inflator/Deflator - Model One. Provides high volume air power for rapid inflation or deflation of large inflatables.
Walker Bay 8′ Boat Rudder with Aluminum Blade, Part #24046
Walker Bay 8 Rudder Assembled with Aluminum Blade and Rudder Head
37″ Inflatable Boat Bench Seat with Storage and Cushion
Comfortable bench seat that fits snuggly between inflated tubes. Features a large, open dry storage compartment, and removable cushions that snaps in place. Dry storage opening is covered with 1/4” Starboard and has a large, 26” by 12” opening.
Close
Taylor Made Inflatable Boat Cover 16, Boats 16’5″ to 17’4″, up to 80″ Beam; Hot Shot Acrylic Fabric.
Inflatable Boat Cover, Blunt Bow, by Taylor Made. This Hot Shot™ Acrylic Fabric is a light-weight alternative that provides better water, mildew, and UV resistance than its poly-cotton counterparts.
St. Croix Stainless Steel, 3 Step Folding Inflatable Boat Ladder with Handles
St. Croix 3 Step folding inflatable boat ladder, Stainless Steel with non skid flat treads.
Close
Wheel-a-Weigh Extra Duty Dinghy Transom Wheels – Flip-up. 330 lb. Max Capacity
Get your inflatable boat to and from the water quickly, safely, and easily! Wheel-a-Weigh Standard launching wheels are for loads up to 330 lbs. (150 kg). Wheels are pneumatic.
-18%
Close
Weaver Raised Davit Heads up to Four Inches
Raised davit heads are used for Swim Platforms where the platform is too low for a normal hookup of the RSH120.
Close
SkyDock Storage System for Garages, and Decks
The ideal garage storage solution for dinghies, paddle boards, kayaks, roof box, camping equipment, in fact anything that needs lifting off the ground to save on storage space.
34″ Inflatable Boat Bench Seat with Storage and Cushion
Comfortable bench seat that fits snuggly between inflated tubes. Features a large, open dry storage compartment, and removable cushion that snaps in place.