Close
Inflatable Boat Adhesive for PVC and Urethane Inflatables, Weaver 2 Part, 1 Liter (33.8 US fluid ounces)
Weaver PVC 2-part inflatable boat adhesive, 1 Liter, for gluing on rubber pads, lifting D rings and making repairs to Zodiacs and other inflatables made from PVC and Urethane material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Inflatable Boat Adhesive for Hypalon Boats, Weaver 2-Part 1 Liter (33.8 US fluid ounces)
Weaver Hypalon 2-part adhesive, 1 Liter, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Sold out
Close
Achilles Inflatable Wood Seat, Part # ACHWST112LG
Achilles painted wood seat with foam & channel attachment. 35 &1/4 inch
Sold out
Close
AB Inflatable Boat Removable Aluminum Rowing Seat
AB Inflatable Boat Removable Aluminum Rowing Seat. Fits the AB 8/9/10 VL-VS, AB 9.5/10 AL and AB 10UL.
Close
Inflatable Boat Hook and Loop Oar Holder Hypalon or PVC- Light Gray
Glue down inflatable boat hook and loop oar holder, 4.5" in diameter, available in Hypalon or PVC
Close
Walker Bay Inflatable Boat Deluxe Seat Genesis #25005
Walker Bay Genesis Inflatable Boat Deluxe Center Seat. (Part #25005)
Close
Walker Bay Genesis Bow Locker/Seat (Part #3001030198)
Walker Bay Genesis Bow Locker/Seat
Close
Bravo Hose Fitting for Bravo 1, 2 and 10 Foot Pumps
Hose Fitting/Connector for Bravo 1, 2 and 10 Foot Pumps
Close
Walker Bay 8 & 10 Bow Cushion
Walker Bay Bow Locker Cushion for Plastic Rowing Dinghies 8' and 10'
Close
Weaver Snap Davit Stainless Steel Yoke (Pair) Part # RSH120
Weaver stainless steel yoke (PART#RSH120) for RP101. This is the part that actually snaps into the Davit Heads. Sold as a pair.
Close
Weaver Quick Kit for Easy Davit Head Removal from Your Swimstep, Part #QUICKKIT
Weaver plates for easy removal of davit heads (PART #WEAQUICKKIT). Receiver plates for easy removal of the Davit Heads from the Swim Platform for use with the RBD100 and SSHR for the SD1.
Close
Weaver Transom Arc
A rod that goes from the dinghy transom up over the top of the tube to the davit head on the swim platform for inflatables with 16-18 inch tubes.
Close
Weaver Snap Davit Heads (Pair) Part #RS110, Standard Size
Weaver davit heads (PART #RS110) are the spring loaded part of the Weaver RBD100 kit that mounts to the swim platform that the yolk snaps into. Sold as a pair of davit heads.
-18%
Close
Weaver Raised Davit Heads up to Four Inches
Raised davit heads are used for Swim Platforms where the platform is too low for a normal hookup of the RSH120.
Close
Weaver Snap Davit Extended Heads (Pair) Part #Extended Heads. Extended 1″ – 4″
Weaver davit heads (PART #Extended Heads) are the spring loaded part of the RBD100 that mounts to the swim platform that the RSH120 snaps into. Sold as a pair.
Close
Weaver Davit Heads that are Raised and Extended Out
UpSet Davit Heads are for Swim Platforms that are high off the water. They are custom made with a maximum
Close
Weaver Transom Mount Davit Heads (Pair) Part #RS150 for Vertical Transom
Transom mount davit heads are the spring loaded part of the RBD150 that mounts to the transom of the yacht that the RSH120 snaps into. Sold as a pair of davit heads.
Close
Weaver Snap-Ups Davits
They have a 12" drop for hooking up a dinghy from a high swim platform and lifting it out of the water to a 3" drop below the swim platform so the dinghy doesn't fill up with water.
Sold out
Close
Mercury Oar Holder, Gray
Mercury Oar Holder, Gray
Close
Weaver Front Arc Only
Weaver front Arc only, this unit mounts on the floor of the dinghy and connects to existing davit heads mounted on the swim platform.
Please fill out the worksheet located in the link below. Upon completion return it us via email: [email protected] or via Fax at 973-506-7087.
Front Arc WorkSheet
Close
Wheel-a-Weigh Extra Duty Dinghy Transom Wheels – Flip-up. 330 lb. Max Capacity
Get your inflatable boat to and from the water quickly, safely, and easily! Wheel-a-Weigh Standard launching wheels are for loads up to 330 lbs. (150 kg). Wheels are pneumatic.
Sold out
Close
12 Volt Electric Inflatable Boat Inflation Pump
For Inflatable Boats and Toys, Towables, Air Beds, Balls and more. Inflates or deflates quickly. Comes with various valves and 10' power cord
Close
Gatorskinz Grit Finish Step Pads, White -Pair
GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years. Available in White.
Close
KeelShield, Boat Keel Protector, 5 feet, white
Keel protector kit comes ready to install with strongest, thickest 3M marine adhesive available, Guaranteed to last the lifetime of your boat
Close
KeelShield, Boat Keelguard Protector, 4 feet, white
Keel protector kit comes ready to install with strongest, thickest 3M marine adhesive available, Guaranteed to last the lifetime of your boat
Close
KeelShield, Boat Keelguard Protector, 6 feet, white
Keel protector kit comes ready to install with strongest, thickest 3M marine adhesive available, Guaranteed to last the lifetime of your boat.
Close
KeelShield, Boat Keelguard Protector, 7 feet, white
Keel protector kit comes ready to install with strongest, thickest 3M marine adhesive available, Guaranteed to last the lifetime of your boat.
KeelShield, Boat Keelguard Protector, 8 feet, white
Keel protector kit comes ready to install with strongest, thickest 3M marine adhesive available, Guaranteed to last the lifetime of your boat.
Close
Walker Bay Transom Gasket, Genesis Fold Down Transom
Walker Bay Genesis model transom gasket.
Close
PVC Inflatable Boat Seat Attachments, light gray, each
PVC Inflatable Boat Seat Retainers.
Close
Hypalon Square Bimini Top Attachments, Light Gray or White, for Inflatable Boats, Pair
Inflatable Boat glue down bimini mounting pads are made up of a stainless steel heavy duty spring loaded pin. Square. Sold as a pair.
Close
Hypalon Bimini Mounting Pads for Inflatable Boats, Pair, Light Gray, White and Dark gray
Inflatable Boat glue down bimini mounting pads are made up of a stainless steel heavy duty spring loaded pin. Round. Sold as a pair.
Close
PVC Bimini Mounting Pads for Inflatable Boats, Light Gray or White, Pair
Inflatable Boat glue down PVC bimini mounting pads are made up of a stainless steel heavy duty spring loaded pin. Round. Sold as a pair. Available in Light Gray or white.
Close
Hypalon D-Ring for Inflatable Boats
Inflatable Boat Stainless Steel D-Ring with Hypalon apron available in white, light gray, dark gray, black and red. The strongest and only D-ring on the internet available in genuine Pennel and Orca, 1100 denier hypalon fabric.
Close
Hypalon Tow Ring for Inflatable Boats
Inflatable Boat Stainless Steel Tow-Ring with Hypalon apron available in white, light gray, dark gray, black and red. The strongest and only Tow-ring on the internet available in genuine Pennel and Orca, 1100 denier hypalon fabric.
Close
PVC D-ring for Inflatable Boats
Inflatable Boat D-Ring with vinyl (PVC) apron in white, black, light gray, medium gray or red. D-Rings have a vinyl pad/apron, a polypropylene strap, and a stainless steel D-ring.