Close
Inflatable Boat Adhesive, Hypalon Boats, Weaver 2 Part 1/4 Liter, 8 oz.
Weaver Hypalon 2-part adhesive, 8 ounce, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Inflatable Boat Adhesive for PVC and Urethane Inflatables, Weaver 2 Part, 1/4 Liter, 8 oz
Weaver PVC 2-part inflatable boat adhesive, 8 ounce, for gluing on rubber pads, lifting D rings and making repairs to Zodiacs and other inflatables made from PVC and Urethane material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Registration Sticker Holders for Inflatable Boats, Pair
Registration sticker holders glue down to your inflatable boat and come in 3" x 3" or 3" x 4" size.
Close
Inflatable Boat Adhesive – Crossover 2 Part Adhesive , PVC and Hypalon, 1/4 liter, 8 oz.
Weaver Crossover 2-part adhesive, 8 ounce - Works on both PVC and Hypalon. For gluing on rubber pads, lifting D rings and making repairs to inflatables.
This item cannot be shipped via Priority Mail or UPS Air
Close
Weaver Rubber Pads for Inflatable Boats, Pair
Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150, gray. Sold in Pairs.
Close
Inflatable Boat Adhesive for Hypalon Boats, Weaver 2-Part 1 Liter (33.8 US fluid ounces)
Weaver Hypalon 2-part adhesive, 1 Liter, for gluing on rubber pads, adding lifting rings and making repairs to inflatables made from Hypalon material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Weaver Stand Off Pads for Inflatables, Swivel (Weaver Part #RP304)
Weaver Stand off Pads for Inflatables, Gray, Swivel
Close
Weaver Snap Davit Stainless Steel Yoke (Pair) Part # RSH120
Weaver stainless steel yoke (PART#RSH120) for RP101. This is the part that actually snaps into the Davit Heads. Sold as a pair.
Close
Inflatable Boat Adhesive for PVC and Urethane Inflatables, Weaver 2 Part, 1 Liter (33.8 US fluid ounces)
Weaver PVC 2-part inflatable boat adhesive, 1 Liter, for gluing on rubber pads, lifting D rings and making repairs to Zodiacs and other inflatables made from PVC and Urethane material.
This item cannot be shipped via Priority Mail or UPS Air
Close
Weaver Davit Stand-Off Pad – Gray (Weaver Part # RP301). Non-Swiveling.
Weaver RP301 rubber pad for stand-off brackets. Rubber pad 4 inches in diameter for attaching the stand-off bracket to the inflatable dinghy in gray. Sold individually.
Close
Weaver Quick Kit for Easy Davit Head Removal from Your Swimstep, Part #QUICKKIT
Weaver plates for easy removal of davit heads (PART #WEAQUICKKIT). Receiver plates for easy removal of the Davit Heads from the Swim Platform for use with the RBD100 and SSHR for the SD1.
Close
Weaver Rubber Pads for Inflatable Boats, Single Pad
Rubber pads that are glued onto the inflatable dinghy for use with all RBD100 and RBD150, gray. Sold as a single pad.
Close
Weaver Snap Davit Kit for Inflatable Boats, Swim Platform Kit, Gray RBD100 GY. 150 lbs Maximum Weight
Weaver dinghy Davits, swim platform kit (PART #RBD100). Snap davits for soft or hard bottom inflatable dinghies. Intalls on swim platform. Light gray pads.
Close
Weaver Snap Davit Extended Heads (Pair) Part #Extended Heads. Extended 1″ – 4″
Weaver davit heads (PART #Extended Heads) are the spring loaded part of the RBD100 that mounts to the swim platform that the RSH120 snaps into. Sold as a pair.
Close
Weaver Spacer Bolts for Weaver Chocks
Weaver spacer bolts for boat chocks.
Close
Weaver Stand Off “L” Clip
"L" Clips come with the Stand-Off Brackets but can be purchased separately on a card with 4 "L" Clips.
Close
Weaver Transom Arc
A rod that goes from the dinghy transom up over the top of the tube to the davit head on the swim platform for inflatables with 16-18 inch tubes.
Close
Weaver Dinghy Transom Wheels, Inflatable Boat Flip-Up Transom Wheels. 600 lb. Capacity
Weaver flip-up Dinghy Transom Launch wheels are made from stainless steel and roto-molded wheels that can hold up to a 600 pound inflatable or hard shell dinghy. The wheels are designed to go over rocks and sand with ease.
-18%
Close
Weaver Raised Davit Heads up to Four Inches
Raised davit heads are used for Swim Platforms where the platform is too low for a normal hookup of the RSH120.
Close
Weaver Davit Heads that are Raised and Extended Out
UpSet Davit Heads are for Swim Platforms that are high off the water. They are custom made with a maximum
Close
Weaver Adjustable Stand Off Brackets – 48″-54″
Weaver adjustable stand-off brackets 48"-54". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Stand Off Brackets – 36″
Weaver stand-off brackets available in 12", 18", 24", 30", 36", 42", 48", 54" and 60" long. Stand-off Brackets hold the dinghy in the up-right position while on the swim platform. Sold as a pair with quick release clips on both ends.
Close
Weaver 1/2″ Beckson Clips, set of 4 (Part #300-Beckson)
Weaver 1/2" Beckson Clips, set of 4.
Close
Weaver CREM Removable Chock Bases for All Weaver Brand Chocks
Weaver Removable bases that let you remove the Weaver chock stanchions from your deck or bridge. Must be ordered at the time you order your chocks as the chocks require minor modications.
Close
Weaver Adjustable Stand Off Brackets – 42″-48″
Weaver adjustable stand-off brackets 42"-48". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver MotoSto Swim Platform Mount
The Weaver Swim Platform MotoSto allows you to remove the motor from your dinghy and place it on the swim platform in a horizontal position before getting out of the dinghy.
Close
Weaver Snap Davit Heads (Pair) Part #RS110, Standard Size
Weaver davit heads (PART #RS110) are the spring loaded part of the Weaver RBD100 kit that mounts to the swim platform that the yolk snaps into. Sold as a pair of davit heads.
Close
Weaver Adjustable Stand Off Brackets – 24″-30″
Weaver adjustable stand-off brackets 24"-30". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Stand Off Brackets – 24″
Weaver stand-off brackets available in 12", 18", 24", 30", 36", 42", 48", 54" and 60" long. Stand-off Brackets hold the dinghy in the up-right position while on the swim platform. Sold as a pair with quick release clips on both ends.
Close
Weaver Snap-Ups Davits
They have a 12" drop for hooking up a dinghy from a high swim platform and lifting it out of the water to a 3" drop below the swim platform so the dinghy doesn't fill up with water.
Close
Weaver Adjustable Stand Off Brackets – 36″-42″
Weaver adjustable stand-off brackets 36"-42". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 30″-36″
Weaver adjustable stand-off brackets 30"-36". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Offset Davit Heads
Offset Davit Heads are for Swim Platforms that are high off the water.
Close
Weaver Adjustable Stand Off Brackets – 18″-24″
Weaver adjustable stand-off brackets 18"-24". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Adjustable Stand Off Brackets – 54″- 60″
Weaver adjustable stand-off brackets 54"-60". Also available in Adjustable Sizes 12"-18", 18"-24", 24"-30", 30"-36", 36"-42", 42"-48", 48"-54" and 54"-60". Sold as a pair with quick release clips on both ends.
Close
Weaver Davit Transom Mount Kit – gray RBD150GY. For Sailboats or Yachts without Swim Platforms.
Weaver transom mount kit (Part #RBD150GY). Snap davits for soft or hard bottomed inflatable dinghies for yachts without a swim platform with gray pads. Mounts to your transom for quick, easy removal and storage.