
Details
Made in the US using superior standards. Don't lose or damage your dinghy by installing tow rings that wear and break away!
Can be used on any hypalon inflatable boat, but is specific to AB, Caribe, Apex, Avon, Novurania and Nautica inflatables. 2.5" wide stainless steel d-ring with triangular Hypalon pad. The d-ring pad is 10" wide on the bottom of the triangle and 8.5" inches high. They have a Hypalon apron, a polypropylene strap, and a stainless steel D-ring. The secondary bottom pad is made of raft floor material and is pre-sanded for a superior bond. The straps are computer sewn and glued to the bottom pad; the Hypalon apron is glued over the D-ring and bottom pad assembly.
D Ring installation instructions:
-
Decide where you're going to place the d ring then trace around D ring with a pencil.
-
Apply masking tape or painting tape around the traced area.
-
Sand the boat as well as the d ring lightly and clean the area well using Toluene (Hypalon boats) or MEK (PVC Boats)
-
Apply 3 applications of glue (2 on boat, one on d ring) allowing each application to become tacky (roughly 15 minutes).
-
Stick the d ring down to boat and roll out the bubbles with a roller rasp.
-
Allow to dry for 24 hours.
Additional Information
part number | No |
---|---|
Choose | No |
Choose Dinghy Model | No |
Choose Dinghy Model | No |
Select Fabric | No |
Choose Boat Model | No |
Choose Boat Model | No |
Boat Model | No |
Choose Quart/Gallon | No |
Valve Model | No |
Choose | No |
Bracket Size | No |
Choose Color | No |
Smart Tab SX Kits | No |
Model Number | No |
Choose Fabric | No |
Choose Diameter | No |
Feet | No |
Choose Length | No |
Sunbrella Colors | No |
Model | No |
Sharkskin Colors | No |
Colors | No |
Width | No |
Mounting Option | No |
Choose Size | No |
Manufacturer | Whitewater Designs |