We are not required to collect sales & use tax on deliveries to addresses outside New Jersey. You may be responsible for payment of tax in your state if otherwise required or upon initial registration of your boat.

$7.95 flat rate shipping! No code needed
Most orders placed by 3pm EST ship same day
1/4-Liter - Crossover 2 Part Adhesive , Single 1/4 liter

Inflatable Boat Adhesive - Crossover 2 Part Adhesive , PVC and Hypalon, 1/4 liter

Product Options:

  • Buy 4 for $35.45 each and save 7%

Price $37.95


Our glues and solvents are rotated quickly and stored in an air-conditioned and heated facility in order to guarantee freshness and effectiveness! 
Weaver Crossover 2-part adhesive, 8 ounce, for gluing on rubber pads, adding lifting D rings and making repairs to inflatablesl. This glue is now a crossover meaning it will work  on PVC or Hypalon so if you don't know what your boat is made of, this is adhesive to purchase.    We cannot ship glues via air freight because they are hazardous materials.  We can only ship to lower 48 states via UPS Ground or US Mail Parcel Select.  Buy 4 or more and save $1.50 each.
The activator/curing agent will last approximately 7 days after opening.  Once the 2 parts are mixed together, you will have a 4 hour working time before the glue begins to harden.  Single part Vyna-Bond Glue has a longer shelf life and will last approximately 1 or 2 months after the can is open.  For single part Vyna-bond glue, Orange Off Cleaner and Adhesive Remover, MEK or ToobSeal Interior Repair Sealant, please see related products below.  Canadian customers can call Dan's Nautical Shop at (519) 735-2628 or email
Unopened, the glue will last one year.
Instructions for use:
1.  Use glue in a well ventilated  area.  Do not use in high humidity, in the rain, direct sun or near the water.  It is recommended that the humidity level not be above 60%.
2.  If possible, the tube should be inflated why gluing.
3.  Prep the surface of the inflatable with MEK (PVC) or Toluol (Hypalon) solvent to soften the fabric.  Do not scrub the surface, just wipe with a clean rag in one direction.
4.  Mix the A 110 curing agent thoroughly into the adhesive for 2-3 minutes in the amount supplied.
5.  One half hour prior to gluing the pads, coat the pad, D ring or patch and the inflatable with a thin coat of glue.  Put the lid back on the can.  Remember the glue has a 4 hour pot life.
6.  Once the half hour is up, apply a thin coat of adhesive to each surface and allow 2-5 minutes until the glued surface is dry to the touch.  Reapply another thin layer of glue to each surface.
7.  Bring the two coated surfaces together using sufficient pressure to ensure intimate contact, taking care not to create any air pockets.  Use a roller rasp or deflate the boat and use your hand on the backside of the tube to force out any air pockets under the pad or patch.
8.  Allow to set for at least 48 hours. 

Additional Information

part number No
Choose Single 1/4 liter
Choose Dinghy Model No
Choose Dinghy Model No
Select Fabric No
Choose Boat Model No
Choose Boat Model No
Boat Model No
Choose Quart/Gallon No
Valve Model No
Choose No
Bracket Size No
Choose Color No
Smart Tab SX Kits No
Model Number No
Choose Fabric No
Choose Diameter No
Feet No
Choose Length No
Sunbrella Colors No
Model No
Sharkskin Colors No
Colors No
Width No
Mounting Option No
Choose Size No
Manufacturer No